Optichain Group logoOptichain Group
Menu
← All articles

November 17, 2026

LTL Freight: How to Ship 150 to 15,000 lb Without Overpaying

LTL Freight: How to Ship 150 to 15,000 lb Without Overpaying

Forklift loading mixed palletized freight into an LTL trailer at a terminal, with cinematic magenta and cyan lighting

LTL freight, or less-than-truckload freight, lets you ship palletized goods without paying for an entire trailer. Your freight shares trailer space with other shippers’ loads, and you pay based on the space and weight you use, along with factors such as freight class, distance and delivery requirements.

LTL typically fits shipments around 150 to 15,000 pounds: often one to six pallets and less than 12 linear feet. The right measurements, packaging and service details can help avoid surprise charges and choose LTL when it makes sense.

What is LTL freight?

LTL combines compatible shipments from multiple shippers in a carrier’s network. A carrier moves freight through terminals, where shipments may be sorted and transferred between trailers before final delivery. That shared network can make LTL more economical than booking a full truck for a small shipment, but it also means your freight may be handled more than once.

That handling is why packaging matters. LTL freight does not travel as a dedicated, untouched load from your dock to your customer’s dock. A weak pallet, unsecured cartons or inaccurate dimensions can cause damage, delays or billing adjustments.

Wrapped pallet freight being measured before pickup at a shipping dock

What shipments fit LTL?

A typical LTL shipment is:

  • About 150 to 15,000 pounds total
  • One to six pallets
  • Under roughly 12 linear feet of trailer space
  • Palletized, crated or otherwise prepared for forklift handling

These are useful planning ranges, not universal carrier limits. Maximum shipment weight, pallet dimensions and service options vary by carrier and lane. If your load is unusually heavy, tall or difficult to handle, confirm acceptance and equipment before booking.

No loading dock at one end? LTL can still work. A liftgate can lower freight between the trailer and ground level. If the driver must take it beyond the immediate delivery point, ask about inside delivery as well. These services need to be requested and priced in advance.

How does LTL freight pricing work?

Your LTL price is shaped by four main levers: freight class, shipment weight and dimensions, distance, and accessorial services. You can’t control every carrier or lane condition, but you can provide accurate shipment details and choose the service your delivery actually requires.

1. Freight class

Freight class is part of the NMFC system maintained by the National Motor Freight Traffic Association (NMFTA). Classes run from 50 to 500. In general, freight that is denser, easier to handle and easier to stow tends to receive a lower class than freight that is fragile, awkward or difficult to transport.

Class considers four characteristics:

  • Density: How much the freight weighs for its volume
  • Handling: How difficult or delicate it is to move
  • Stowability: How easily it fits with other freight
  • Liability: The risk of damage, theft or other loss

The right class depends on the commodity and applicable NMFC item, not just a guess based on appearance. Check classification with your shipping partner or consult NMFTA’s density guidance.

2. Weight and dimensions

Carriers use the shipment’s weight and the space it occupies to rate freight. Measure and weigh the shipment after it is palletized and wrapped. Include the pallet, packaging, protruding items and any part of the load that extends beyond the pallet.

Density is weight divided by volume. To calculate it, measure the handling unit’s length, width and height in inches, multiply those measurements, then divide by 1,728 to get cubic feet. Divide the shipment’s weight by that cubic footage to get pounds per cubic foot.

For example, a 48 × 40 × 45-inch pallet occupies 50 cubic feet. At 450 pounds, its density is 9 pounds per cubic foot. As NMFTA explains in its density best practices, accurate dimensions are important because density can affect the applicable class.

3. Distance

Origin and destination drive the lane and transit plan. The same shipment can price differently on different routes, so a quote for one lane is not a reliable benchmark for another.

4. Accessorials

Accessorials are services beyond standard dock-to-dock pickup and delivery. Common examples include liftgate service, inside delivery, residential delivery and limited-access locations. If your site needs one of these services, declare it when requesting the quote. Leaving it out can lead to an extra charge or a failed delivery attempt.

A reclassification is one of the most common sources of an unexpected LTL invoice. It can happen when the carrier’s inspection finds that the shipment’s actual class, dimensions or weight differ from what was booked. Keep measurements and shipment details consistent across your quote request, bill of lading and labels.

Forklift moving palletized freight inside an LTL terminal

When should you choose LTL vs. FTL?

LTL is often a good fit for a small shipment that does not need a dedicated trailer. Full truckload (FTL) may be worth comparing when your shipment grows to around six pallets, occupies roughly 12 linear feet or more, or uses more than about half a trailer. These are decision points, not fixed rules: compare actual quotes for your lane, freight class and service needs.

Consideration LTL FTL
Trailer space Shared with other shippers Dedicated to your shipment
Best fit Smaller palletized loads Loads that use much of a trailer
Handling May pass through terminals and be transferred Typically fewer freight transfers
Cost basis Shipment weight, dimensions, class, lane and services Dedicated trailer and lane
Delivery needs Flexible for smaller shipments; declare accessorials Useful when the load needs direct, dedicated movement

LTL can lower your transportation cost for a small shipment, but it may involve more handling and a less direct route. FTL can offer a more direct move, but you pay for dedicated trailer capacity. Compare both options when your shipment approaches the crossover; don’t assume that a particular pallet count always makes one mode cheaper.

The NMFTA’s LTL vs. FTL overview provides a useful explanation of the two modes.

How do you ship LTL without the drama?

A few disciplined steps can reduce avoidable charges and delivery issues:

  1. Measure and weigh after packing. Record the final length, width, height and weight of each handling unit, including pallets and packaging.
  2. Build stable pallets. Secure cartons and freight so they can be moved by forklift. Avoid overhang where possible, and make sure the load can withstand normal terminal handling.
  3. Confirm freight class and commodity details. Use the correct NMFC item where applicable. Describe what you are shipping clearly rather than relying on a vague label such as “parts.”
  4. Declare delivery requirements. Tell the carrier if you need a liftgate, inside delivery or another accessorial at either end.
  5. Check free time and receiving hours. Confirm how long the shipment can wait at pickup or delivery before additional charges may apply, and make sure your dock or consignee is ready.
  6. Track by PRO number. The PRO number is the carrier’s shipment reference. Use it to follow progress and investigate exceptions.
  7. Consolidate when it helps. If you regularly send several small shipments to similar destinations, ask whether combining them into a larger shipment or comparing LTL with another mode could improve the cost.

NMFTA’s LTL packaging guidance is a useful reference for preparing freight for carrier handling.

Why compare multiple LTL carriers?

Carrier rates and service options can differ by lane, freight class, shipment details and delivery needs. Comparing one carrier’s price with a second option gives you a clearer basis for choosing than relying on a single rate alone.

Optichain Group’s live multi-carrier rate engine compares 7+ LTL carriers, using direct carrier APIs to return available options with sub-one-hour quotes. A single point of contact can help coordinate the shipment and keep its details visible from quote through delivery.

For companies shipping across E-Commerce, Healthcare, Automotive, Pet and Oil & Gas supply chains, the right LTL choice depends on the freight and the receiving location, not just the lowest line-item price. Explore Optichain’s services or request an LTL quote.

Palletized outbound shipments staged for consolidation beside a dry van trailer

Where does LTL fit across industries?

LTL can support shipments that are too large or heavy for parcel but too small to justify a full trailer. Examples include:

  • E-Commerce: Replenishing stores or fulfillment locations with palletized inventory.
  • Healthcare: Moving packaged medical equipment and supplies between distribution points. Confirm any handling and delivery requirements before booking.
  • Automotive: Sending service parts, components or shop supplies to dealers and repair locations.
  • Pet supply: Distributing bagged products, cartons or palletized inventory to retailers and warehouses.
  • Oil & Gas: Shipping field supplies to a commercial receiving point or job site, with access and delivery requirements confirmed in advance.

Job sites, clinics and retail locations may not have standard docks or receiving hours. Share the delivery setup when quoting so the carrier can plan the right service.

Frequently asked questions about LTL freight

What does LTL mean in freight?

LTL means less-than-truckload. Your freight shares trailer space with other shippers’ goods, and you pay for the weight and space your shipment uses rather than booking the entire trailer.

How much does LTL shipping cost?

There is no single LTL price. Cost depends on freight class, weight and dimensions, distance, carrier and any accessorial services such as liftgate or inside delivery. Request a quote using the shipment’s final, palletized details.

What freight class is my shipment?

Freight class depends on the commodity and its NMFC classification, which considers density, handling, stowability and liability. Confirm the correct NMFC item and class for your freight instead of estimating from weight alone.

Is LTL cheaper than FTL?

LTL is often a better fit for smaller shipments because you pay for part of a trailer rather than a dedicated one. As a load approaches six pallets, 12 linear feet or about half a trailer, compare current LTL and FTL quotes for your lane to find the better option.

Get an LTL quote

Send the shipment’s origin and destination, pallet count, packed dimensions, total weight, commodity and delivery requirements. Optichain Group can compare options across 7+ LTL carriers and return a quote in under an hour.

Request an LTL quote or call (281) 949-6136.