November 17, 2026
Lowboy Trailer: What It Hauls, Legal Limits, and When to Book One
Lowboy Trailer: What It Hauls, Legal Limits, and When to Book One

A lowboy trailer is a heavy-haul trailer with a low deck and a dropped rear section, or “well,” that helps tall equipment clear bridges and overpasses. Its gooseneck connects the trailer to the tractor, while the lowered deck reduces the height of the loaded machine compared with a flatbed. That extra clearance can help a load stay within a route’s legal height limit, but it does not remove the need to check dimensions, weight, and permits.
Why does lowboy deck height matter?
The lower the deck, the less height the cargo adds to the full vehicle. That can make the difference between a legal move and one requiring an over-height permit or a different route.
A 13 ft 6 in overall height limit is common on U.S. roads, but it is not universal. Limits and exceptions vary by state and route, so confirm the rules for the complete trip. If a machine is 12 ft tall, for example, placing it on a deck 2 ft off the ground would put the total at about 14 ft before accounting for the tractor, suspension, or how the cargo sits. A lowboy deck around 18 in could bring that rough total down, but only a measured, loaded configuration and route check can confirm whether the move is legal.
Lowering the deck by a couple of feet can sometimes let a taller machine move without an over-height permit. That does not automatically make the shipment permit-free: width, weight, axle loading, and state-specific restrictions may still require permits or escorts.
What are typical lowboy trailer dimensions and capacity?
Lowboy trailer dimensions and payload depend on the trailer design, axle setup, and route. Use these figures as planning ranges, not as universal equipment limits.
| Lowboy planning spec | Typical range |
|---|---|
| Well length on a standard trailer | Roughly 24–29 ft |
| Well deck height | Roughly 18–24 in |
| Capacity on a standard lowboy | Commonly around 35–40 tons |
| Capacity on multi-axle or RGN configurations | Can exceed 60 tons |
Extended and stretch trailers can provide longer deck space. Multi-axle configurations can distribute heavier loads across more axles, but legal payload still depends on the specific trailer, tractor, axle spacing, route, and permits. A trailer’s advertised capacity is not the same as the weight that can legally travel on every road.
Ask your carrier to confirm the deck length, deck height, and axle configuration of the actual trailer assigned, not just the equipment class.
What types of lowboy trailers are available?
The right setup depends on the machine’s dimensions, weight, and how it can be loaded.
- Standard lowboy: A fixed-gooseneck trailer with a lowered center well. The cargo is commonly loaded from the rear using ramps or a crane, depending on trailer design and the machine.
- RGN (removable gooseneck): The gooseneck detaches so the deck can lower toward the ground. Wheeled or tracked equipment can often drive or be winched onto the trailer from the front.
- Stretch or sliding lowboy: The deck extends or adjusts to carry longer cargo. Check the resulting deck length and configuration with the carrier.
- Multi-axle lowboy: Additional axles help distribute heavier loads. The correct number and arrangement depend on the freight and route.
The phrase lowboy vs. RGN can be confusing. An RGN is a type of lowboy configuration; the key distinction is that its gooseneck detaches. “Lowboy” is also sometimes used broadly for double-drop trailers, while equipment and terminology can vary between carriers.

How does a lowboy compare with a double drop, step deck, or flatbed?
A double-drop trailer has a lowered well between raised front and rear sections. In many freight contexts, “double drop” and “lowboy” are used interchangeably, but confirm the actual trailer configuration rather than relying on the name alone.
| Trailer | Deck height | Typical use | Common loading method |
|---|---|---|---|
| Lowboy / double drop | Low center well | Tall, heavy machinery | Rear ramps, crane, or RGN front loading |
| RGN | Low deck; detachable front | Self-propelled heavy equipment | Drive, roll, or winch on from the front |
| Step deck | Higher upper deck and lower rear deck | Cargo taller than a flatbed can accommodate | Forklift, crane, or ramps |
| Flatbed | Single deck above the road | General open-deck freight with less height sensitivity | Forklift or crane |
In a step deck vs. flatbed choice, the step deck’s lower rear deck provides more height clearance than a flatbed, but less than a lowboy well. If the cargo is especially tall or heavy, a lowboy may be the better fit. The trailer should be selected against the full loaded dimensions, not just the machine’s listed height.
What can you haul on a lowboy trailer?
Lowboys commonly move excavators, dozers, wheel loaders, motor graders, backhoes, compactors, cranes, drilling rigs, and other large machinery. They can also carry industrial cargo such as transformers, pressure vessels, and oversized plant equipment.
Wheeled or tracked equipment usually self-loads on an RGN if it runs and the loading surface is suitable. A non-running machine or cargo without wheels may require a winch, ramps, forklift, or crane. Confirm the loading plan before dispatch; not every lowboy has the same ramps or loading capability.

What drives the cost of a lowboy trailer move?
There is no single rate that applies to every lowboy shipment. The price reflects the equipment needed and the work required to move your cargo safely and legally.
- Trailer type and axle count: A stretch, RGN, or multi-axle setup may be needed for specific dimensions or weight.
- Cargo weight and dimensions: Height, width, and length affect equipment selection, permits, routing, and escort requirements.
- Distance and route: A direct route may not be usable if bridges, roads, or local restrictions limit the loaded configuration.
- Permits and escorts: Oversize or overweight moves can require state permits, pilot cars, police escorts, or pole cars, depending on the load and route.
- Deadhead to pickup: The carrier’s distance to the origin can affect the quote.
- Season and availability: Equipment demand and carrier availability can change the options for a given pickup window.
- Loading and unloading time: Crane scheduling, difficult site access, or extended wait time can add cost.
When comparing quotes, check what is included. Ask whether permits, escorts, and loading services are part of the quoted scope or handled separately.
How do you book a lowboy trailer without problems?
Good measurements and site details help match your shipment to the right trailer and reduce avoidable changes.
- Provide exact dimensions and weight. Include length, width, height, and operating weight with attachments. Measure tire sidewalls, mirrors, buckets, blades, counterweights, and any parts that cannot be removed.
- Measure the transport configuration. Record the machine as it will travel, not just the manufacturer’s base specification. Note whether the boom, bucket, or other equipment can be lowered or removed.
- Check loading requirements. Confirm whether the machine can drive, roll, or be winched onto the trailer. Review ramp angle and ground clearance, especially for long or low machines.
- Describe both sites. Share access details for pickup and delivery: soft ground, narrow gates, low wires, tight turns, slopes, overhead obstructions, and room to position a tractor and trailer.
- Confirm permits and escorts. Ask who will arrange them, what the quote includes, and how much lead time the route requires. Permit requirements and timing depend on the states and load configuration.
- Plan for the receiving site. If the destination is not ready, ask about laydown yard or storage options before the truck is dispatched.
A common mistake is measuring the machine with the attachment off, then discovering the bucket, raised boom, or tire sidewalls make the shipment wider or taller. Another is assuming that every lowboy is an RGN. Confirm the exact loading method, equipment configuration, and securement plan before booking.

How can Optichain Group help with a lowboy move?
Optichain Group handles open-deck and heavy-haul shipments, from over-dimensional cargo to super loads. Our heavy-haul specialists can review your cargo dimensions, loading needs, route, and site conditions to help determine whether an RGN, lowboy, step deck, double drop, or flatbed is appropriate.
For larger moves, we coordinate permits, escorts, police escorts, pilot cars, and pole cars as required. You get a single point of contact, end-to-end shipment visibility, and access to laydown yards and storage when a delivery site is not ready. Our live multi-carrier rate engine and direct carrier APIs support sub-hour quote times for eligible shipments.
Learn about Optichain’s freight services or request a project freight quote. You can also call (281) 949-6136.
Lowboy trailer FAQs
What is a lowboy trailer used for?
A lowboy trailer is used to transport tall or heavy equipment and industrial cargo that may not fit safely or legally on a flatbed or step deck. Common freight includes excavators, dozers, cranes, drilling rigs, transformers, and pressure vessels.
How much can a lowboy trailer hold?
A standard lowboy commonly has capacity in the 35–40 ton range, while multi-axle and RGN configurations can exceed 60 tons. Actual legal payload depends on the specific equipment, axle arrangement, cargo, route, and required permits.
What is the difference between a lowboy and an RGN?
An RGN, or removable gooseneck, is a lowboy-style trailer with a detachable front section. Detaching the gooseneck lowers the deck for front loading, which is useful for many wheeled or tracked machines.
Do you need a permit to pull a lowboy?
A lowboy does not automatically require a permit, but the loaded shipment may need one if it exceeds the limits for height, width, weight, or length on its route. Rules vary by state, so the carrier or permit team should check the full configuration and route before the move.
Need to move heavy equipment or oversized cargo? Request a heavy-haul quote from Optichain Group or call (281) 949-6136.
